The post Photo gallery appeared first on Kabelverlegung Glasfaser Tiefbau.

Micro-Trenching with the trenching machines from LiBa

Glass fibre is the future. Data is transmitted much faster than is possible with copper.  Not only the Internet, but also radio, TV, telephone and much more will become much faster through fibre optics. Thanks to the latest technology and processes, it is possible to lay fibre optic cables underground in a very short time. This means, for example, that small excavated trenches of minimal width can be dug and closed again in one day.

Micro Trenching – Lay fibre optic cables even more effectively with a trencher!

Micro Trenching, or Mini Trenching, is a widespread technique that allows for example to lay fibre optic cables quickly and cheaply. The advantages: Micro Trenching causes little damage to the environment, as the construction sites are smaller and therefore take less time, so there are fewer traffic obstructions and less air pollution through exhaust fumes. Projects have also shown that the use of micro-trenching can significantly reduce both costs and working time.

Instead of laboriously digging up the roads with an excavator, micro-trenching simply involves cutting a narrow slot directly at the curb, allowing the micro pipes or fibre optic cables, but also other cables or pipes, to be laid. The name is derived from the English words „micro“ and „trenching“, which in English means something like „tiny trench“. So the name already tells you what kind of technology is involved.

The advantage of Micro-Trenching

Micro-trenching is faster and more efficient, and in general is economically much more localised than conventional civil engineering methods. The first 100 metres can be laid within one morning, which is not possible with an excavator. In this case, a special milling machine will be much faster than an excavator. Because, as already mentioned, it is sufficient for the fibre optic cable if Micro-Trenching cuts narrow trenches into the asphalt. How to do this is explained here.

Fast and cost-effective laying of fibre optic cables

This type of milling is particularly popular in towns and housing estates. The construction sites should and must be kept quite small in order not to disturb the residents and not to obstruct the traffic flow too much. In order to be able to guarantee this, the trench cutters do not have to be too large and immobile. For this reason we have special machines that we offer for this work.

Our favourite machine for such construction sites is the GM 500 R. This is a milling wheel which can be used very effectively in the city due to its light weight of 1200 kg. The light weight also makes it possible to dig perfect trenches in the asphalt, making micro-trenching ideal. A big advantage of this machine is the already mentioned lightness. This enables the customer to attach the machine to a carrier that is also quite light and compact.

All our machines are produced on site and are made of strong and high quality steel. With the Gm 500 R, we have developed a machine that is designed to simplify work in villages or towns. We have used all our experience to make the trencher as flexible as possible but also robust enough. The result is a machine that is very flexible in cities, because it is very light and can be moved hydraulically. On the other hand it is also robust enough to dig an ideal trench through asphalt and stones. Whether it’s fibreglass laying, micro trenching or sewage pipes, our milling wheel will help you on any construction site.

LIBA trencher GM4 as carrier machine

In combination we are happy to offer our GM 4. This is an excellent carrier and is also quite light and agile. Of course the machine can also be used on other carriers. Already a weight of approx. 3500 KG is sufficient to work reasonably with this machine. The hydraulic power should be possible at 80 litres at 300 bar.

What does micro-trenching depend on?

The GM 500 R milling wheel for perfect glass fibre installation

• Unlike conventional trenching machines, our milling wheel allows you to work on much narrower and smaller construction sites
• Especially when laying fibre optic cables, clean trenches are very important in order not to damage the cable
• Even through asphalt and stones, this milling wheel easily cuts a clean trench for optimum cable laying
• Another special feature that makes the milling wheel even more flexible is the hydraulic side offset on the rear cross beam
• You can therefore move your milling wheel hydraulically from right to left, depending on which side the construction site is on
• This is an enormous advantage when they have to mill in inaccessible areas
• Thanks to this lateral offset, they can, for example, easily drive on the left-hand side of their carrier while milling on the right-hand side
• This is sufficient for micro trenching as well as for glass fibre laying or wider cables

Since micro-trenching is all about digging a small but clean trench, our milling wheel is ideal for this task. Due to the stability and robustness of this machine, perfect trenches, even in asphalt, are no problem. Furthermore, we also offer an installation shaft for cable laying. This enables you to work even faster and more effectively. The cable to be laid is laid through this shaft directly behind the milling machine, so that you can mill and lay the cable in one go. This saves time and therefore costs. It also protects the environment, as you can finish your construction site faster and traffic can start moving again more quickly. This reduces the emission of exhaust gases. For further questions, click here!

Minimum trench, maximum speed!

If you decide to go for micro-trenching, you will have some advantages worth mentioning. This procedure is not only more local from an economic point of view but also ecological. As already mentioned, there are some advantages of micro-trenching that are very beneficial to the environment. For example, because the work is completed more quickly, traffic is resumed more quickly, which means that less exhaust gases are released.

In this method, narrow trenches and slots are made in the asphalt using milling technology. This means that only a small trench width and depth is required and enables the rapid completion of glass fibre routes. In addition to micro-trenching, empty conduits are also to be used and expanded above ground.

Trenching is one of several special laying techniques and is usually always used in combination with other techniques. Important for a sensible use is the differentiation of the methods with regard to trench width and trench depth. In addition, the restoration of the surfaces is also important.

Trenching involves digging a trench only up to 30 cm deep into the pavement or road where conventional cable protection pipes or flat liners with the corresponding fibre optic cables are laid. The cable trench is filled in immediately after laying. A frost-proof, temporarily flowable, self-compacting building material is then used as the backfill material. Thus, traffic obstructions are only of short duration.

By the way, there are several trenching methods, namely micro, mini and macro trenching. These differ in the depth and width of the realised milling slots and in the cutting or milling technology used.

• • Network construction

  • Overhead line construction

  • Pipeline construction

  • Network expansion

  • Cable installation

  • Telecommunications

Today LIBA presents itself as a streamlined company in production and administration. With a staff of about 20 employees it is able to offer highly modern and specialised machines and system solutions. These include self-propelled machines, attachments or special machines for a wide range of applications. The export share amounts to 35% of the total turnover.

We would be pleased to give you the opportunity to personally convince yourself of the performance of our „Grabenmeister“ trenching machines in our Lingen factory.

With products from LIBA, work is made considerably easier and our customers achieve a decisive improvement in quality through perfected machining processes.

 With us you benefit from many years of experience and professional expertise also in the field of micro-trenching

If you have any questions about our trench cutters for cable laying or would like a quotation, please use our contact form. We will deal with your request immediately and contact you. You can also call us at +49 591 – 76 314. We look forward to your visit!

The post Micro-Trenching for glass fibre laying – milling instead of digging appeared first on Kabelverlegung Glasfaser Tiefbau.

Glass fibre – with high speed into the future

The future belongs to glass fibre. Data can be transmitted much faster than with copper. Today, not only the Internet, but also radio, TV, telephone and much more come through these fibres. No wonder, then, that laying fibre optic cables is currently a much sought-after job. These cable installations are carried out in the middle of the countryside as well as in villages and towns along the Inn. If you intend to do such work, you have come to the right place!

Laying underground cables with the GM4 Allrad – save time and money

The trenchers of the GM 4 all-wheel drive series are diesel driven and self-propelled all-wheel drive trenchers. They have a low dead weight and thus guarantee a low ground load. The tilt device can easily compensate for lateral slopes of up to 15 degrees, which is a great help especially in hilly regions.

The excavated material is ejected either to the right or left. However, the conveyor belt can be inserted on both sides so that the excavated material can also be loaded directly. Due to the additional filling funnel, milling and filling with gravel is realised in only one operation. Further accessories enable the GM 4 all-wheel drive trenchers to directly pull in cables and pipes. This means that milling, laying and backfilling can then be carried out in a single operation. This saves a lot of time, which also means that the construction site can be completed more quickly. In addition, the all-wheel milling machines can also be equipped with twin tyres. This provides even better grip and stability, which can be particularly important in rural areas.

With the self-propelled machine, trenches can be cut without any problems, even in hard ground. For example in asphalt. Especially our GM4 is often used for work in the city. Due to its low weight and the high mobility of the GM4 it is ideal for urban work. These trenchers are indispensable tools for cable laying, both in the country and in the city.

Moving into the future – glass fibre

A special milling machine can in many cases replace the excavator. The reason for this is the speed at which such a milling machine works. The work that such a milling machine can do in an hour is hardly possible with an excavator. However, many people do not even know that it is possible to work with a trencher. Some people only want to dig small trenches and do not want to invest in a trencher. However, it is clearly more efficient and environmentally friendly.

But if you look a little bit into the future, you can see that fibreglass will be a big undertaking for some years to come. Finite cables still have to be laid to build up a stable network. For this reason, the investment in a trench cutting machine is worthwhile. Apart from the efficiency of such a machine, our machines also meet all environmental standards. So you can look into the future with confidence, knowing that you are up to date.

When it comes to successful cable laying, the word „micro-trenching“ is often used. This describes a type of milling in which only a narrow gap is cut into the ground. This is quicker because the gap is very small, as already mentioned, and the work can therefore be carried out more quickly. Especially in the cities a lot is relied on this technique. You can find further information here!

By the way, there are several trenching methods, namely micro, mini and macro trenching. These differ in the depth and width of the realised milling slots and in the cutting or milling technology used.

Laying underground cables with an ecological footprint

The extremely environmentally friendly alternative to the excavator guarantees a maximum workload for cable laying without major impairments in terms of the Nature Conservation Act. A central focus of activity in construction is the laying of fibre optic cables in various design variants. The services of the all-rounder include not only the construction of cable trenches, but also the environmentally friendly excavation of the ground. The individual equipment of our trenching machines is available on request.

Construction and cable laying in a fast procedure. Thanks to the latest technology and processes, the fibre optic cables are laid underground within a very short time. Small excavated trenches of minimised width are usually closed again the same day. In many cases, civil engineering work can even be dispensed with altogether, as empty conduits for the fibre optic cables can be pulled through under the pavement using, among other methods, the flush drilling method. In this way, disturbances for the residents are also kept to a minimum.

With us you benefit from many years of experience and professional expertise 

Our devices are characterised by high functionality and reliability. They have already proven themselves in many fields of application and numerous projects and are used by a large number of companies. In addition, we offer you more than 50 years of experience, which is reflected in the technical sophistication and professionalism of our trenching machines.

Today LIBA presents itself as a streamlined company in production and administration. With a staff of about 20 employees it is able to offer highly modern and specialised machines and system solutions. These include self-propelled machines, attachments or special machines for a wide range of applications. The export share amounts to 35% of the total turnover.

We would be pleased to give you the opportunity to personally convince yourself of the performance of our „Grabenmeister“ trenching machines in our Lingen factory. With products from LIBA the work is made considerably easier and our customers achieve a decisive improvement in quality through perfected machining processes.

If you have any questions about our trench cutters for cable laying or would like a quotation, please use our contact form. We will deal with your request immediately and contact you. You can also call us at +49 591 – 76 314. We look forward to your visit!

The post Correct cable laying of optical fibre appeared first on Kabelverlegung Glasfaser Tiefbau.

Milling of cable trenches in civil engineering – only minor impairments with optimum efficiency

The environmentally friendly alternative to excavators are trench milling, because they ensure the best workload when milling cable ditches without causing major damage in the sense of nature conservation.

When milling the cable trenches, the main focus is on the special variants of cable laying. In any case, a well thought-out project involves the professional milling of cable trenches. It is no less important that the milling of cable ditches goes through the stage without major damage to the land and above all in an environmentally compliant manner. You want more details about our trench cutters? We will be happy to provide you with the necessary documents on request.

Precise milling with LiBa

A clean trench is essential for cable laying. Many machines have the problem that they cannot pull clean trenches and thus half of the excavated material falls back into the ditch. This is an important feature, especially when milling cable trenches. Our machines guarantee you a clean trench!

The reason for this is, on the one hand, our many years of experience, in which we were able to perfect this process. On the other hand, all our machines are tested in our in-house line in order to solve such problems before a machine goes into production. Thus, we can guarantee that our trenches are always clean and precise milled so that they can carry out their project without any problems.

Working ecologically when milling cable trenches

The extremely environmentally friendly alternative to the excavator is the trench cutter, because it guarantees a maximum workload when milling cable ditches without major impairments within the meaning of the Nature Conservation Act. A central focus of activity in construction is the laying of glass fibers in various versions. The services of the all-rounder include not only the milling of the cable trenches, but also an environmentally friendly excavation of the floor. The individual equipment of our trench cutters is available on request.

Construction and cable laying in a fast-track process. Thanks to state-of-the-art technology and processes, the fiber optic cables are laid underground within a very short time. Small excavated trenches of minimized width are usually closed again on the same day. In many cases, civil engineering work can even be dispensed with altogether, as empty pipes for the glass fibers can be pulled under the pavement, for example by means of a rinsing drilling process. In this way, disturbances for the residents are also kept to a minimum. This is of great importance when working in residential regions.

If there is work in a housing estate, it is important to work as quietly and quickly as possible. These demands can be made with the so-called „micro-trenching“. In this procedure, a small trench is milled into the asphalt. The trench is sufficient to lay a fiber optic cable, but is also kept as small as possible.

The difference to conventional milling is the depth of the trench. While it is better to mill a little deeper in the countryside, milling of cable ditches in the city is often not possible. Then the „micro-trenching“ comes into play. Due to the low digging depth, the trench can also be drawn faster. The result is faster work and thus earlier completion of the construction site.

Advantage by quality

One of our greatest advantages besides experience and service is our quality. Our machines are built and completed here on site. Perfection is very important to us in production. We do not take the cheapest material, but the best. For this reason, our machines are also excellent in every area.

Cheap material is certainly cheaper to purchase, but damage when milling cable ditches and unclean digging of the trenches are almost inevitable. In the longer term, a stable machine is therefore much more lucrative. This way of thinking accompanies us to the beginning of LiBa and has given us a good reputation over the years, which we want to keep with all our efforts. Therefore, we would be very happy to convince you of our machines and to welcome you as a customer! For more information please click here!

You benefit from many years of experience and professional expertise

Our devices are characterized by high functionality and reliability. They have already proven themselves in many fields of application and in numerous projects and are used by a large number of companies. In addition, we offer you more than 50 years of experience, which is reflected in the technical maturity and professionalism of our trench cutters.

Today, LIBA presents itself as a streamlined company in manufacturing and administration. With a workforce of about 20 employees, it is able to offer highly modern and specialized machines and system solutions. This includes self-driving cars, attachments or special machines for a wide range of applications. The export share is 35% of total sales.

In our Lingen plant, we are happy to give you the opportunity to personally convince yourself of the performance of our trench cutters „Grabenmeister“. LIBA products make work much easier and our customers achieve a decisive improvement in quality through perfected machining processes.

If you have any questions about our trench cutters for cable laying or would like a quotation, please use our contact form. We will deal with your request immediately and contact you. You can also call us at +49 591 – 76 314. We look forward to your visit!

The post Milling cable ditches in civil engineering appeared first on Kabelverlegung Glasfaser Tiefbau.

Cable laying -For laying fibre optic cables – the powerful and stable GM 4 all-wheel drive trenchers from LIBA.

In some cases, certain projects relating to the laying of fibre-optic cables, such as underground cables, will have to be carried out or it will be necessary to dig trenches for drainage or irrigation systems. In such cases, the LIBA trenching machines for laying fibre optic cables are extremely useful construction equipment.

The LIBA trenching machines are convincing in every respect. Attributes such as an easy-to-operate control unit, their stable and all-terrain caterpillar drive and an extremely reliable construction make them indispensable helpers. Thanks to their clearly arranged controls, familiarisation with the stable, handy GM 1 all-wheel drive is made extremely easy.

Yes, LIBA trenchers are practically indispensable for the laying of fibre optic cables.

With us you benefit from many years of experience and professional expertise

Our devices are characterised by high functionality and reliability. They have already proven themselves in many fields of application and numerous projects and are used by a large number of companies. In addition, we offer you more than 50 years of experience, which is reflected in the technical sophistication and professionalism of our trenching machines.

Today LIBA presents itself as a streamlined company in production and administration. With a staff of about 20 employees it is able to offer highly modern and specialised machines and system solutions. These include self-propelled machines, attachments or special machines for a wide range of applications. The export share amounts to 35% of the total turnover.

We would be pleased to give you the opportunity to personally convince yourself of the performance of our „Grabenmeister“ trenching machines in our Lingen factory. With products from LIBA the work is made considerably easier and our customers achieve a decisive improvement in quality through perfected machining processes.

If you have any questions about our trench cutters for cable laying or would like a quotation, please use our contact form. We will deal with your request immediately and contact you. You can also call us at +49 591 – 76 314. We look forward to your visit!

The post Cable laying of fibre optic cables appeared first on Kabelverlegung Glasfaser Tiefbau.

Usually, the appropriate working machine is required for the professional creation of trenches for the laying of glass fibre in civil engineering. But the focus must also be on accurate preparation.

Glass fibre laying in civil engineering

But what if there are impairments during milling as a result of wet loam, rubble or stones? The trench cutters for fibreglass laying in civil engineering think in such a case by changing the chain run briefly from forward to reverse. Afterwards, work can be continued without any problems. In view of the low centre of gravity of the machines, it is guaranteed that safe milling is possible even in uneven terrain.

If a tree stump or a root hidden in the ground appears during the laying of fibreglass in civil engineering, such unforeseen obstacles cannot really stop the work. In any case, the milling unit’s adequate ground clearance ensures a smooth passage.

LIBA trench cutters cut straight and clean trenches for glass fibre laying in civil engineering. We can offer a machine for every underground. So we can be sure that our machine will have no problems in the ground to be milled. Of course you can get advice on the right machine for your project from us.

For LIBA trenching machines it is a piece of cake to always cut straight and accurate trenches for cable laying in the ground, as they do their job without jerking at all with their smooth drive. The cutters can be used continuously with maximum efficiency, regardless of the condition of the ground. If the ground is very rocky, we recommend our GM6 ASR. This machine is our weapon when it comes to fighting a rocky ground.

Like all our machines, it has been further developed and improved over the years. There are many technical refinements that provide the customer with enormous support when milling. The machine is powered by a diesel turbo engine with 228 HP, which definitely provides enough power. The chain drive is hydraulic and can be dosed according to the required power. The weight of this trencher is 17,000 KG. This weight is necessary to keep the machine stable and to enable clean milling in hard ground. The driver’s cab can also be swivelled so that the driver has a good view of what is happening at all times and can therefore guide the tiller properly.

Glass fibre laying in civil engineering

In many cases, a trench cutting machine can replace the excavator. The reason for this is the speed at which such a trencher works. The work that such a trencher can do in an hour is hardly possible with an excavator. However, many people do not even know that it is possible to work with a trencher. Some people only want to dig small trenches and do not want to invest in a trencher. But it is more efficient and environmentally friendly.

But if you look a little bit into the future, it is clear that fibre optics will be a big undertaking for some years to come. Finite cables still have to be laid to build a stable network. For this reason, the investment in a trench cutting machine is worthwhile. Apart from the efficiency of such a machine, our machines also meet all environmental standards. So you can look into the future with confidence, knowing that you are up to date.

When it comes to successful glass fibre laying, the word „micro-trenching“ is often used. This describes a type of milling in which only a narrow gap is cut into the ground. This is quicker because the gap is very small, as already mentioned, and the work can therefore be carried out more quickly. In the countryside, such types of milling are often not possible, which is why one then reverts to laying fibreglass in civil engineering. Especially in the cities a lot is relied on this technique. You can find more information here!

By the way, there are several trenching methods, namely micro, mini and macro trenching. These differ in the depth and width of the realised milling slots and in the cutting or milling technology used.

With us you benefit from many years of experience and professional expertise

Glass fiber laying in underground construction

Our devices are characterised by high functionality and reliability. They have already proven themselves in many fields of application and numerous projects and are used by a large number of companies. In addition, we offer you more than 50 years of experience, which is reflected in the technical sophistication and professionalism of our trenching machines. Whether laying fibreglass in civil engineering, working in drainage or laying simple pipelines, our machines will support you.

If you have any questions about our trench cutters for cable laying or would like a quotation, please use our contact form. We will deal with your request immediately and contact you. You can also call us at +49 591 – 76 314. We look forward to your visit!

The post Glass fibre laying in civil engineering appeared first on Kabelverlegung Glasfaser Tiefbau.

GM 6 ASR - Demonstration Machine

Our rock trench cutter is designed for the removal of rocks of different strength levels. Powerful milling drums are used, which break out the rock more efficiently and with a unique milling depth. The result: coarser material and a low fine content.

With the trench cutter, the laying of cables can be implemented cost-effectively, quickly and environmentally friendly, even on heavy soils.

Standard:

• Condition: Very good
• hydraulic cross-inclination adjustment of the milling beam hydraulic
• side-adjustable milling bar (up to 60 cm above the outside of the machine)
• hydraulically pivoting cabin
• hydrostatic caterpillar drive (optional with quick-change adapter rubber plates)

Accessories:

• Cabin with heating and air conditioning
• Filling screw or bulldozer
• Loading conveyor belt for front loading on trucks
• Cable drum recording
• Laser system for depth regulation
• Knife, chisel and mixing chains
• Reel for drain pipes

Click here

GM 4 4 WD

The GM 4 all-wheel drive trench cutter is extremely flexible in its application and meets the most diverse requirements, for example in professional fibre optic cable laying or golf course construction and sports fields.

The TRENCH cutters GM 4 all-wheel drive easily reach milling depths of 600, 800, 1250 and 1500 millimeters.

Standard:

• Engine Doosan – Diesel 4 cylinder water-cooled with 74 hp.
• Driving drive hydrostatic infinitely variable via control pump on radial piston motors (4x)
• Milling drive mechanically designed as a slip clutch via hydraulic cylinder
• Actuation of the milling beam by means of 2 hydr. Cylinders infinitely adjustable
• Conveyor belt hydr. Can be plugged in on both sides for the side removal of the milled floor.
• Control of all functions (milling tree, axle, conveyor belt) electrically via proportional valves centrally from the service edge.
• The service stand is actionable from back to front left and thus allows a direct view of milling beams, milling chain and trench profile

Click here

The post Our used machines appeared first on Kabelverlegung Glasfaser Tiefbau.